Boya BY-AM1 2-channel XLR mixer

Boya BY-AM1 - compact sound mixing solution

The Boya BY-AM1 is a two-channel audio mixer with two 6.35mm line-in or XLR inputs. The input jack can therefore accommodate both inputs. The mixer allows you to easily control the sound from your microphones and send the output to your computer or other recording device. For example, you can connect dynamic/capacitor XLR microphones (such as Boya BY-BM58 or BY-M1000) or instruments with a 6.35mm line-in connector (such as guitars or basses).

The mixer supports sample rates of up to 44.1 - 192 kHz, which means that sound quality is not compromised as it passes through the mixer. The built-in 6.35mm headphone jack allows for convenient monitoring of incoming audio without any delay or interference. A 6.35mm to 3.5mm adapter is also included, so non-audio professional headphones can also be used for monitoring.

The BY-AM1 can provide 48V phantom power via an XLR connector, which also allows the use of passive XLR microphones. The mixer can be attached to a stand or other fixture using the 1/4″ mounting thread on the bottom of the mixer.

The outputs of the mixer are USB-B, which can be connected to your computer using the USB-B to USB-A cable supplied, allowing you to transfer the output directly to your computer's recording software. The mixer also has left and right output plugs, which can be connected to a pair of active speakers, for example.

Technical specifications

• Input connectors: combined XLR/6.35mm line in (2pcs)
• Frequency response (inputs): 20Hz - 20kHz ± 0.1 dB
• Maximum sound level at input (at lowest gain): 9dBu (microphone input), 15dBu (line input), 8dBu (instrument input)
• Gain range (line input): 50 dB
• Impedance (line input): 47 K Ω
• Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
• Power requirements: power from a USB-connected computer
• Power supply: 48V Phantom power
• USB interface: USB 2.0 (USB-B)
• Dimensions: 16 x 10,5 x 4,2 cm
• Weight: 409 g